|
Stanadyne Driver and Cooler Kit COMPLETE KIT
|
|
FSD/PMD #9 OEM Resistor
|
|
FSD/PMD Aftermarket Cooling Kit.
|
|
Our Price: $500.00
|
|
|
|
Our Price: $25.00
|
|
|
|
Our Price: $160.00
|
|
|
|
|
|
|
This kit includes everything INCLUDING a new OEM latest version BRAND NEW PMD to complete the installation. The kit also includes a standard calibration resistor. The PMD and resistor will come pre-mounted to the cooler using industrial heat sink compound instead of a pad. (proven better heat transfer then any pad made) Included in this kit is 1) cooler, grade 8 mounting hardware (required to obtain proper torque for heat transfer), and industrial heat sink compound used in mounting PMD to cooler. Also a brand new Stanadyne PMD, and standard Stanadyne calibration resistor, and complete step-by-step instructions. The original harness will plug right into module without modification and absolutely NO strain on wires unless the last pump was not installed correctly. If that is the case we have an 8" extension that can be purchased. Only basic hand tools required. No drilling or cable splicing. Approximately a 10-20 minute installation. A truely simple Plug-and-play installation. There is a 2 year, unlimited mileage warranty on PMD's purchased after October 1, 2008.
|
THE #9 Resistor gives highest fuel delivery and is needed if you plane on leaving the old PMD on the pump and replacing it with a new one mounted else where.
|
The cooler using industrial heat sink compound instead of a pad. (proven better heat transfer then any pad made) Included in this kit is 1) cooler as pictured, grade 8 mounting hardware (required to obtain proper torque for heat transfer), and industrial heat sink compound used in mounting PMD to cooler. and complete step-by-step instructions. The original harness will plug right into module without modification and absolutely NO strain on wires. Only basic hand tools required. No drilling or cable splicing. Approximately a 10-20 minute installation. A truely simple Plug-and-play installation. See our warranty page for more info.
DOES Not Come with New PMD/FSD (BLACK BOX)
|
|
|
8" PMD Extension Cable
|
|
40" PMD Extension Cable
|
|
94 and UP Glow Plug, 12 Volt, Spade Type
|
|
Our Price: $78.00
|
|
|
|
Our Price: $90.00
|
|
|
|
Our Price: $8.63
|
|
|
|
|
|
|
This extension cable is used to install a chevy 6.5L PMD to a intake mounted PMD cooler. This extension cable is 8 inches.
|
This extension cable is used to install a chevy 6.5L PMD, further away from the engine mounting location. This extension cable is 40 inches.
|
94 and UP Glow Plug, 12 Volt, Spade Type
|
|
|
96-02 Chevy / GM 6.5 FleetGuard Fuel Filter - Fits 96 - 02 GM 6.5 Diesel Engins
|
|
92-96 Chevy / GM 6.5 FleetGuard Air Filter - Fits 92 - 96 Chevy/GMC 6.5L Turbo
|
|
95-02 Chevy / GM 6.5 FleetGuard Air Filter - 95 - 02 Chevy/GMC 6.5L
|
|
Our Price: $19.97
|
|
|
|
Our Price: $20.52
|
|
|
|
Our Price: $17.42
|
|
|
|
|
|
|
96-02 Chevy / GM 6.5 FleetGuard Fuel Filter - Fits 96 - 02 GM 6.5 Diesel Engins
|
92-96 Chevy / GM 6.5 FleetGuard Air Filter - Fits 92 - 96 Chevy/GMC 6.5L Turbo
|
95-02 Chevy / GM 6.5 FleetGuard Air Filter - 95 - 02 Chevy/GMC 6.5L
|
|
|
1995 Chevy / GM 6.5 FleetGuard Air Filter - 82 - 93 Chevy/GMC 6.2L & '95 6.5L Non-turbo
|
|
96-00 GM 6.5 Liter Diesel FleetGuard Air Filter - Chevy/GMC 6.5 Liter Diesel Air Filter Pick Up Trucks & Suburbans
|
|
Chevy / GM 6.5 FleetGuard Air Filter - 97 - 99 Chevy/GMC 6.5L
|
|
Our Price: $19.84
|
|
|
|
Our Price: $21.80
|
|
|
|
Our Price: $18.85
|
|
|
|
|
|
|
1995 Chevy / GM 6.5 FleetGuard Air Filter - 82 - 93 Chevy/GMC 6.2L & '95 6.5L Non-turbo
|
96-00 GM 6.5 Liter Diesel FleetGuard Air Filter - Chevy/GMC 6.5 Liter Diesel Air Filter Pick Up Trucks & Suburbans
|
Chevy / GM 6.5 FleetGuard Air Filter - 97 - 99 Chevy/GMC 6.5L
|
|
|
82-93 GM 6.2 L Glow Plug, 12 Volt, Spade Type
|
|
1985-93 Chevy / GM 6.2 Stanadyne Fuel Filter - Fits 85 - 93 GM 6.2 Diesel Engines
|
|
1982-93 Chevy / GM 6.5 FleetGuard Air Filter - 82 - 93 Chevy/GMC 6.2L & '95 6.5L Non-turbo
|
|
Our Price: $8.63
|
|
|
|
Our Price: $15.80
|
|
|
|
Our Price: $19.84
|
|
|
|
|
|
|
82-93 GM 6.2 L Glow Plug, 12 Volt, Spade Type
|
1985-93 Chevy / GM 6.2 Stanadyne Fuel Filter - Fits 85 - 93 GM 6.2 Diesel Engines
|
1982-93 Chevy / GM 6.5 FleetGuard Air Filter - 82 - 93 Chevy/GMC 6.2L & '95 6.5L Non-turbo
|
|
|
82-88 GM 6.2 L Injection Pump, Light Duty Pickup (8th VIN digit: "C")
|
|
82-88 GM 6.2 L Injection Pump, Heavy Duty Pickup (8th VIN digit: "J")
|
|
NA50 82-83 GM 6.2 L Fuel Injector, Coarse Thread
|
|
Our Price: $448.89
|
|
|
|
Our Price: $448.89
|
|
|
|
Our Price: $40.71
|
|
|
|
|
|
|
82-88 GM 6.2 L Injection Pump, Light Duty Pickup (8th VIN digit: "C")
|
82-88 GM 6.2 L Injection Pump, Heavy Duty Pickup (8th VIN digit: "J")
|
NA50 82-83 GM 6.2 L Fuel Injector, Coarse Thread
|
|
|
NA51 82-89 GM 6.2 L Fuel Injector, Van Style, Short Body
|
|
NA52X 84-89 GM 6.2 L Fuel Injector, Fine Thread (Rebuilt)
|
|
90-93 GM 6.2 L Fuel Injector
|
|
Our Price: $40.71
|
|
|
|
Our Price: $40.71
|
|
|
|
Our Price: $40.71
|
|
|
|
|
|
|
NA51 82-89 GM 6.2 L Fuel Injector, Van Style, Short Body
|
84-89 GM 6.2 L Fuel Injector, Fine Thread Stanadyne Factory Authorized Rebuilt
|
90-93 GM 6.2 L Fuel Injector
|
|
|
82-93 GM 6.2 L Fuel Injector Installation Kit (for all 8 inj.)
|
|
82-93 GM 6.2 L Vacuum Pump, Gear Driven
|
|
82-93 GM 6.2 L Vacuum Pump, Belt Driven
|
|
Our Price: $36.24
|
|
|
|
Our Price: $139.69
|
|
|
|
Our Price: $139.69
|
|
|
|
|
|
|
82-93 GM 6.2 L Fuel Injector Installation Kit (for all 8 inj.)
|
82-93 GM 6.2 L Vacuum Pump, Gear Driven
|
82-93 GM 6.2 L Vacuum Pump, Belt Driven
|
|
|
82-93 GM 6.2 L Feed Pump
|
|
82-93 GM 6.2 L Feed Pump, Electric (limited application)
|
|
82-84 GM 6.2 L Glow Controller, Screw-In Type
|
|
Our Price: $28.41
|
|
|
|
Our Price: $96.11
|
|
|
|
Our Price: $140.03
|
|
|
|
|
|
|
82-93 GM 6.2 L Feed Pump
|
82-93 GM 6.2 L Feed Pump, Electric (limited application)
|
82-84 GM 6.2 L Glow Controller, Screw-In Type
|
|
|
85-93 GM 6.2 L Glow Controller
|
|
GM3 92-93 GM 6.5L Diesel engines Turbo
|
|
GM4 94-97 GM 6.5L Diesel engines Turbo
|
|
Our Price: $84.49
|
|
|
|
Our Price: $650.00
|
|
|
|
Our Price: $650.00
|
|
|
|
|
|
|
85-93 GM 6.2 L Glow Controller
|
GM3 92-93 GM 6.5L Diesel engines Turbo
|
GM4 94-97 GM 6.5L Diesel engines Turbo
|
|
|
GM6 94-00 GM 6.5L Diesel engine Turbo (VAN / Hummer H1)
|
|
GM8 98-00 GM 6.5L Diesel engines Turbo
|
|
OEM STANADYNE PMD/FSD
|
|
Our Price: $787.50
|
|
|
|
Our Price: $650.00
|
|
|
|
Our Price: $339.00
|
|
|
|
|
|
|
GM6 94-00 GM 6.5L Diesel engine Turbo (VAN / Hummer H1)
|
GM8 98-00 GM 6.5L Diesel engines Turbo
|
New OEM latest version BRAND NEW STANADYNE PMD/FSD.
There is a 2 year, unlimited mileage warranty on PMD's purchased after October 1, 2008.
|
|
|
05521 94-00 GM 6.5 L DS4 Electronic Fuel Injection Pump (Heavy Duty, Light Duty, Vans, & Trucks)
|
|
05068 (5068)1994 GM 6.5 L DS4 Electronic Fuel Injection Pump (Heavy Duty, Light Duty, Vans, & Trucks) (For 94 models produced before January 94)
|
|
90-00 Injection Pump Installation Kit (All 6.5 L Fuel Injection Pumps)
|
|
Our Price: $868.42
|
|
|
|
Our Price: $868.42
|
|
|
|
Our Price: $31.12
|
|
|
|
|
|
|
05521 94-00 GM 6.5 L DS4 Electronic Fuel Injection Pump (Heavy Duty, Light Duty, Vans, & Trucks)
|
05068 (5068)1994 GM 6.5 L DS4 Electronic Fuel Injection Pump (Heavy Duty, Light Duty, Vans, & Trucks) (For 94 models produced before January 94)
|
90-00 Injection Pump Installation Kit (All 6.5 L Fuel Injection Pumps)
|
|
|
04911 92-93 GM 6.5 L DB2 Fuel Injection Pump, Heavy Duty Turbo
|
|
04970 92-93 GM 6.5 L DB2 Fuel Injection Pump, Super Duty Turbo
|
|
05119 94-97 GM 6.5 L DB2 Fuel Injection Pump, Heavy Duty Non-Turbo Truck
|
|
Our Price: $549.80
|
|
|
|
Our Price: $549.80
|
|
|
|
Our Price: $549.80
|
|
|
|
|
|
|
04911 92-93 GM 6.5 L DB2 Fuel Injection Pump,Turbo 4911
|
04970 92-93 GM 6.5 L DB2 Fuel Injection Pump, Super Duty Turbo
|
05119 94-97 GM 6.5 L DB2 Fuel Injection Pump, Heavy Duty Non-Turbo Truck
|
|
|
0 5088 94-97 GM 6.5 L DB2 Injection Pump, Heavy Duty Non-Turbo Van
|
|
NA56 / 92 and UP Fuel Injector, Turbo Engine
|
|
92 and UP Fuel Injector, Non-turbo Engine
|
|
Our Price: $549.80
|
|
|
|
Our Price: $34.64
|
|
|
|
Our Price: $46.30
|
|
|
|
|
|
|
0 5088 94-97 GM 6.5 L DB2 Injection Pump, Heavy Duty Non-Turbo Van
|
NA56 / 92 and UP Fuel Injector, Turbo Engine
|
92 and UP Fuel Injector, Non-turbo Engine
|
|
|
92 and UP Fuel Injector Installation Kit (for all 8 inj.)
|
|
92 and UP Vacuum Pump, Belt Driven
|
|
92-97 Feed Pump
|
|
Our Price: $36.41
|
|
|
|
Our Price: $194.93
|
|
|
|
Our Price: $28.41
|
|
|
|
|
|
|
92-08 Fuel Injector Installation Kit (for all 8 inj.)
|
92 and UP Vacuum Pump, Belt Driven
|
92-97 Feed Pump
|
|
|
92-97 Feed Pump, Electric (limited application)
|
|
94-00 Glow Controller
|
|
DURAMAX INJ/LINE/ROCKER GASKET KIT 6.6
|
|
Our Price: $96.11
|
|
|
|
Our Price: $65.34
|
|
|
|
Our Price: $29.95
|
|
|
|
|
|
|
92-97 Feed Pump, Electric (limited application)
|
94-00 Glow Controller
|
DURAMAX INJ/LINE/ROCKER GASKET KIT 6.6
|
|
|
2001 -2004 Super Max High Performance Turbo
|
|
2001 -2004 Duramax OEM Replacement Turbocharger 6.6L
|
|
0986435502 / 2001 - 2004 6.6L Duramax LB7 Common Rail Injector
|
|
Our Price: $1,980.00
|
|
|
|
Our Price: $1,780.00
|
|
|
|
Our Price: $227.50
|
|
|
|
|
|
|
2001 -2004 Super Max High Performance Turbo
|
2001 -2004 Duramax OEM Replacement Turbocharger 6.6L
|
0986435502 / 2001 - 2004 6.6L Duramax LB7 Common Rail Injector
|
|
|
0986435504 / 2004.5 - 2005 6.6L Duramax LLY Common Rail Injector
|
|
0986437303 2001 - 2004 6.6L Duramax Diesel LB7 High Pressure CP3 Common Rail Injection Pump
|
|
0986437308 2004.5 - 2005 6.6L Duramax Diesel LLY High Pressure CP3 Common Rail Injection Pump
|
|
Our Price: $357.50
|
|
|
List Price: $1,330.00 Our Price: $749.60 You Save $580.40!
|
|
|
|
Our Price: $749.60
|
|
|
|
|
|
|
0986435504 / 2004.5 - 2005 6.6L Duramax LLY Common Rail Injector
|
0986437303 2001 - 2004 6.6L Duramax Diesel LB7 High Pressure CP3 Common Rail Injection Pump
|
2004.5 - 2005 6.6L Duramax Diesel LLY High Pressure CP3 Common Rail Injection Pump
|
|
|
DIPACO 6.5 ELECTRONIC FUEL INJECTION PUMP GM 1994(LIGHT DUTY)-2000(LIGHT & HEAVY)
|
|
DIPACO FSD/PMD (BLACK BOX)
|
|
Dipaco (BlackBox) Driver and Cooler Kit COMPLETE KIT
|
|
Our Price: $795.00
|
|
|
|
Our Price: $275.00
|
|
|
|
Our Price: $500.00
|
|
|
|
|
|
DIPACO REMANUFACTURED DS FUEL PUMP FOR GM 6.5L Pump Mounted Driver (PMD) Only NEW PMD units are used in the remanufacturing of 05521DP fuel pumps.
Sealing All seals, o-rings, washers, bearings and other pump sealing components are new.
Optical Sensor Each optical sensor is tested before use. Only the latest model optical sensor, part number 33883, is used.
Pump Testing Each pump is tested after assembly using an AVM2PC test bench and appropriate pump software drivers.
|
General Motors has announced they will begin using the 6.5L DS pump mounted driver (PMD) sold by DTech in their PMD service kit, replacing the Stanadyne PMD. The DTech PMD offers superior performance and is designed to withstand the pump engine compartment operating temperatures without having to be mounted off of the pump. The DTech PMD is available in a kit and is also included on DTech remanufactured DS fuel pumps.
|
This kit includes everything INCLUDING a new Dipaco (latest version) BRAND NEW PMD to complete the installation. The kit also includes a standard calibration resistor. The PMD and resistor will come pre-mounted to the cooler using industrial heat sink compound instead of a pad. (proven better heat transfer then any pad made) Included in this kit is 1) cooler as pictured, grade 8 mounting hardware (required to obtain proper torque for heat transfer), and industrial heat sink compound used in mounting PMD to cooler. Also included are complete step-by-step instructions. The original harness will plug right into module without modification and absolutely NO strain on wires unless the last pump was not installed correctly. If that is the case we have an 8" extension that can be purchased. Only basic hand tools required. No drilling or cable splicing. Approximately a 10-20 minute installation. A truely simple Plug-and-play installation. There is a 1 year or 50,000 miles warranty.
|
|
|
6.6L Duramax LBZ Common Rail Injector 2006
|
|
6.6L Duramax LBZ Common Rail Injector 2007-2008
|
|
Duramax 6.6L Injector Install Kit
|
List Price: $555.50 Our Price: $444.40 You Save $111.10!
|
|
|
List Price: $572.25 Our Price: $457.80 You Save $114.45!
|
|
|
|
Our Price: $17.70
|
|
|
|
|
|
|
0986435521 6.6L Duramax LBZ Common Rail Injector 2006
|
0986435520 6.6L Duramax LBZ Common Rail Injector 2007-2008
|
INJECTOR AND RETURN LINE INSTALLATION KIT 6.6 DURAMAX
|
|